Description

Nylon 6/12 is a high-performance, semi-crystalline polyamide copolymer known for its excellent balance of mechanical properties and chemical resistance. This engineering plastic is particularly valued for its lower moisture absorption compared to other nylons, leading to superior dimensional stability in humid environments. It is essential for manufacturers requiring durable, reliable components in demanding applications across the automotive, electrical, and industrial sectors.

Application

• Automotive Components: Used in fuel lines, connectors, and under-the-hood parts due to its resistance to hydrocarbons and temperature stability.
• Electrical & Electronics: Ideal for cable jacketing, connectors, and coil bobbins where good dielectric properties and flame retardancy are required.
• Industrial Machinery: Manufactured into gears, bearings, and seals that benefit from its wear resistance and low friction.
• Consumer Appliances: Found in power tool housings and kitchen appliance components for its strength and aesthetic finish.
• Medical Devices: Suitable for specific surgical instruments and device housings that can be sterilized.
• Packaging Films: Used in high-barrier, flexible packaging for food and sensitive products.

Basic Information

Product Name	Nylon 6/12
CAS No.	26098-55-5
Molecular Formula	(C12H22N2O2)n • (C6H11NO)n
Molecular Weight	Polymer (variable)
Synonyms	Poly(hexamethylene dodecanediamide); Polyamide 6/12; PA 612; PA 6/12; Nylon 612; Nylon-6,12; Poly[imino(1,6-dioxohexamethylene)imino(1,12-dioxododecamethylene)]
EINECS	Contact for details

Quality Control

Our Nylon 6/12 is produced under a stringent quality management system. Each batch is tested against key parameters including melt flow rate, moisture content, and thermal properties to ensure consistency and performance. Certificates of Analysis (COA) detailing lot-specific results are available upon request to support your quality assurance and regulatory needs.

Storage

Preserve in a tightly closed container, protected from light. This material is hygroscopic (moisture-sensitive) and must be stored in a cool, dry place at room temperature (15-25°C). Original packaging should remain sealed until use to prevent moisture uptake, which can affect processing and final properties.

Specification

Item	Specification
Appearance	White or off-white pellets
Identification (IR)	Conforms to standard
Moisture Content	< 0.1 %
Melting Point (DSC)	210 - 220 °C
Relative Viscosity	2.4 - 3.0
Tensile Strength	> 70 MPa
Flexural Modulus	> 2500 MPa

Note: Specifications can be tailored. Please contact us for the detailed technical data sheet of a specific grade.